Cold Drawn Precision Steel Tube GB/T3639 20# OD 32mm Wall 3mm Honed for Hydraulic Cylinder
Cold Drawn Precision Steel Tube GB/T3639 20# OD 32mm Wall 3mm Honed for Hydraulic Cylinder
Herkunftsort
China
Markenname
Jingwei
Zertifizierung
ISO 9001:2015, GB/T3639, EN 10305-1 on request
Modellnummer
JW-PRE-3639
Produktdetails
Grad:
20# (CK20 / S20C)
AD x WT:
32 mm x 3 mm
Bohrungstoleranz:
H8 / H9, Rauheit Ra 0,2 - 0,4
Hervorheben:
GB/T3639 precision tube
,
honed hydraulic cylinder tube
,
32mm cold drawn tube
Zahlungs-u. Verschiffen-Ausdrücke
Min Bestellmenge
1 Tonne
Preis
USD 980 - 1250 per ton FOB Tianjin
Verpackung Informationen
Gebündelt in Holzkisten, geölter Lauf, verschlossene Enden
Lieferzeit
15 - 25 Tage nach Einzahlung
Zahlungsbedingungen
T/T 30 % Anzahlung, Restbetrag gegen B/L-Kopie; L/C auf Sicht
Versorgungsmaterial-Fähigkeit
800 Tonnen pro Monat
Produkt-Beschreibung
A hydraulic cylinder tube is bought on the inside diameter, not the outside. The bore has to hold tolerance along the full stroke, the surface has to seal against a polyurethane or PTFE rod seal, and the wall has to be uniform enough that the honing tool does not break through into a thin section. This GB/T3639 cold drawn tube is produced from grade 20# seamless hollow, cold drawn to near final size, then honed to an H8 or H9 bore with a surface roughness of Ra 0.2 to 0.4